[  Contact Us   |   FREE Analysis  ]
repair cast iron nottingham

Repair Cast Iron in Nottingham

Three Key Steps To Determine If You Can Repair A Cast Iron Break Or Crack

It is not easy to repair cast iron due to the brittleness of the metal. Compared to steel and wrought iron, cast iron is one of the most difficult metals to repair.

There are three stages to assess whether you can repair a cast iron break or crack:

1) Can the break or crack be repaired?

Generally speaking, a small break or crack can be repaired. Larger breaks and cracks may need specialist preparation, metal filling or extra work to complete a repair. Before any work is undertaken on the part, it is best to take a digital photograph of the break or crack and send it to a specialist cast iron repair company for analysis.

They will be able to advise on the type of cast iron repair to be undertaken and the fees involved.

2) Is the cast iron break or crack accessible?

If the cast iron part can be removed then this makes the repair process much easier. Removing the cast iron part should be done carefully and in a way that retains all other fixtures and fittings (brackets, nuts, bolts etc).

If the part cannot be removed, then there needs to be consideration into how much space surrounds the part as to whether an in situ repair could be undertaken. In situ repairs are possible on larger machines, but can be very difficult to perform on smaller machines.

3) Is it economical to repair the part?

Budget is always an issue when deciding whether a cast iron part can be repaired. If the part is easy to remove and readily available as a new part, it could be cheaper to fit a new part.

Older parts from car engines, generators, pumps etc may not be available as new parts and will require a repair.

Cast iron is used in a wide variety of parts including cast iron cylinder heads, engine blocks, exhaust manifolds, turbocharger casings, valve bodies, pump housings, gearboxes, electric motors, flanges etc.

For more information on how to repair cast iron, please click below:

repair cast iron

Nottingham is a major manufacturing city situated in the East Midlands, whose prosperity was founded during the industrial revolution on the textile industry, in particular lace manufacture.

However the UK textile industry fell into decline in the decades following World War Two and very little textile manufacture now takes place in Nottingham.

Nottingham is home to the headquarters of many famous companies, one of the best known being Boots the Chemists.  Although Boots is no longer a research based pharmaceutical company, a combination of former Boots researchers and university spin off companies have spawned a thriving pharmaceutical/science/biotechnology sector. Biocity, sits in the heart of the city and houses around thirty science-based companies.

Nottingham receives a considerable volume of tourists, with many attracted by its nightlife and shops, by its history and by the legend of Robin Hood and his Merrie Men, with thousands visiting Sherwood Forest and Nottingham Castle.

Our Services
 
© Technilock Ltd. All Rights Reserved.

Technilock Limited
Unit 5C Boardman Road
Boardman Industrial Estate
Swadlincote
DE11 9DL

Tel: +44 (0) 1283 222202
Fax: +44 (0) 1283 222203
Email: